Adhesive Dispensers for Structural Bonding
Like our customers, you can rely on our 30 plus years of application experience to bring you the meter, mix system to best meet your needs in applying adhesives in large structural or simple bonding applications. Our experience in building adhesive dispensing equipment for epoxy, silicone, urethane, acrylic, and other materials distinguishes Ashby Cross from the competition. The equipment is designed for both the adhesive to be processed and the application. With hundreds of adhesive chemistries on the market, our application knowledge can be the difference between the success and failure of your project. Contact us for selection assistance.
DXR Refill Station & DXH Dispenser
The DXR Refill Station and the DXH Dispenser are ideal tools for bonding applications needing mobility and multiple operators or application points.
The refill station features all stainless steel construction MMA resistant seals accurate ratio, quick refilling of the DXH hand-held dispenser.
2500DA with Drive Assist
The 2500 Double Acting, piston, meter - mix system with Drive Assist is used for processing structural adhesives of any viscosity and ratio. The system will process materials such as epoxy, urethane, and silicone with 1:1 to 20:1 ratio by volume either filled or unfilled. The in-line configuration of the metering cylinders allows processing materials with wide viscosity difference without affecting the accuracy of the ratio. Hardened cylinders and rotary valves along with wear-resistant seals provide prolonged life with abrasive materials.
GP80 Meter Mix System
GP80 Bench Top Meter Mix System - The GP80 table-top, gear meter-mix system for potting and encapsulating with non-abrasive materials such as epoxy and urethane. The GP80 will process a wide range of ratios from 1:1 to 10:1 with an adjustable ratio capability.